openresty/doc/LuaJIT-2.1/running.pod

422 lines
7.9 KiB
C

=pod
LuaJIT
=head1 Running LuaJIT
=over
=item * LuaJIT
=over
=item * Download E<rchevron>
=item * Installation
=item * Running
=back
=item * Extensions
=over
=item * FFI Library
=over
=item * FFI Tutorial
=item * ffi.* API
=item * FFI Semantics
=back
=item * jit.* Library
=item * Lua/C API
=item * Profiler
=back
=item * Status
=over
=item * Changes
=back
=item * FAQ
=item * Performance E<rchevron>
=item * Wiki E<rchevron>
=item * Mailing List E<rchevron>
=back
LuaJIT has only a single stand-alone executable, called C<luajit> on
POSIX systems or C<luajit.exe> on Windows. It can be used to run simple
Lua statements or whole Lua applications from the command line. It has
an interactive mode, too.
=head2 Command Line Options
The C<luajit> stand-alone executable is just a slightly modified
version of the regular C<lua> stand-alone executable. It supports the
same basic options, too. C<luajit -h> prints a short list of the
available options. Please have a look at the E<rchevron> Lua manual for
details.
LuaJIT has some additional options:
=head2 C<-b[options] input output>
This option saves or lists bytecode. The following additional options
are accepted:
=over
=item * C<-l> E<mdash> Only list bytecode.
=item * C<-s> E<mdash> Strip debug info (this is the default).
=item * C<-g> E<mdash> Keep debug info.
=item * C<-n name> E<mdash> Set module name (default: auto-detect from
input name)
=item * C<-t type> E<mdash> Set output file type (default: auto-detect
from output name).
=item * C<-a arch> E<mdash> Override architecture for object files
(default: native).
=item * C<-o os> E<mdash> Override OS for object files (default:
native).
=item * C<-e chunk> E<mdash> Use chunk string as input.
=item * C<-> (a single minus sign) E<mdash> Use stdin as input and/or
stdout as output.
=back
The output file type is auto-detected from the extension of the output
file name:
=over
=item * C<c> E<mdash> C source file, exported bytecode data.
=item * C<h> E<mdash> C header file, static bytecode data.
=item * C<obj> or C<o> E<mdash> Object file, exported bytecode data
(OS- and architecture-specific).
=item * C<raw> or any other extension E<mdash> Raw bytecode file
(portable).
=back
Notes:
=over
=item * See also string.dump() for information on bytecode portability
and compatibility.
=item * A file in raw bytecode format is auto-detected and can be
loaded like any Lua source file. E.g. directly from the command line or
with C<loadfile()>, C<dofile()> etc.
=item * To statically embed the bytecode of a module in your
application, generate an object file and just link it with your
application.
=item * On most ELF-based systems (e.g. Linux) you need to explicitly
export the global symbols when linking your application, e.g. with:
C<-Wl,-E>
=item * C<require()> tries to load embedded bytecode data from exported
symbols (in C<*.exe> or C<lua51.dll> on Windows) and from shared
libraries in C<package.cpath>.
=back
Typical usage examples:
luajit -b test.lua test.out # Save bytecode to test.out
luajit -bg test.lua test.out # Keep debug info
luajit -be "print('hello world')" test.out # Save cmdline script
luajit -bl test.lua # List to stdout
luajit -bl test.lua test.txt # List to test.txt
luajit -ble "print('hello world')" # List cmdline script
luajit -b test.lua test.obj # Generate object file
# Link test.obj with your application and load it with require("test")
=head2 C<-j cmd[=arg[,arg...]]>
This option performs a LuaJIT control command or activates one of the
loadable extension modules. The command is first looked up in the
C<jit.*> library. If no matching function is found, a module named
C<jit.E<lt>cmdE<gt>> is loaded and the C<start()> function of the
module is called with the specified arguments (if any). The space
between C<-j> and C<cmd> is optional.
Here are the available LuaJIT control commands:
=over
=item * C<-jon> E<mdash> Turns the JIT compiler on (default).
=item * C<-joff> E<mdash> Turns the JIT compiler off (only use the
interpreter).
=item * C<-jflush> E<mdash> Flushes the whole cache of compiled code.
=item * C<-jv> E<mdash> Shows verbose information about the progress of
the JIT compiler.
=item * C<-jdump> E<mdash> Dumps the code and structures used in
various compiler stages.
=item * C<-jp> E<mdash> Start the integrated profiler.
=back
The C<-jv> and C<-jdump> commands are extension modules written in Lua.
They are mainly used for debugging the JIT compiler itself. For a
description of their options and output format, please read the comment
block at the start of their source. They can be found in the C<lib>
directory of the source distribution or installed under the C<jit>
directory. By default this is C</usr/local/share/luajit-2.0.5/jit> on
POSIX systems.
=head2 C<-O[level]>
C<-O[+]flag> C<-O-flag>
C<-Oparam=value>
This options allows fine-tuned control of the optimizations used by the
JIT compiler. This is mainly intended for debugging LuaJIT itself.
Please note that the JIT compiler is extremely fast (we are talking
about the microsecond to millisecond range). Disabling optimizations
doesn't have any visible impact on its overhead, but usually generates
code that runs slower.
The first form sets an optimization level E<mdash> this enables a
specific mix of optimization flags. C<-O0> turns off all optimizations
and higher numbers enable more optimizations. Omitting the level (i.e.
just C<-O>) sets the default optimization level, which is C<-O3> in the
current version.
The second form adds or removes individual optimization flags. The
third form sets a parameter for the VM or the JIT compiler to a
specific value.
You can either use this option multiple times (like C<-Ocse -O-dce
-Ohotloop=10>) or separate several settings with a comma (like
C<-O+cse,-dce,hotloop=10>). The settings are applied from left to right
and later settings override earlier ones. You can freely mix the three
forms, but note that setting an optimization level overrides all
earlier flags.
Here are the available flags and at what optimization levels they are
enabled:
Flag
-O1
-O2
-O3
fold
E<bull>
E<bull>
E<bull>
Constant Folding, Simplifications and Reassociation
cse
E<bull>
E<bull>
E<bull>
Common-Subexpression Elimination
dce
E<bull>
E<bull>
E<bull>
Dead-Code Elimination
narrow
E<bull>
E<bull>
Narrowing of numbers to integers
loop
E<bull>
E<bull>
Loop Optimizations (code hoisting)
fwd
E<bull>
Load Forwarding (L2L) and Store Forwarding (S2L)
dse
E<bull>
Dead-Store Elimination
abc
E<bull>
Array Bounds Check Elimination
sink
E<bull>
Allocation/Store Sinking
fuse
E<bull>
Fusion of operands into instructions
Here are the parameters and their default settings:
Parameter
Default
maxtrace
1000
Max. number of traces in the cache
maxrecord
4000
Max. number of recorded IR instructions
maxirconst
500
Max. number of IR constants of a trace
maxside
100
Max. number of side traces of a root trace
maxsnap
500
Max. number of snapshots for a trace
hotloop
56
Number of iterations to detect a hot loop or hot call
hotexit
10
Number of taken exits to start a side trace
tryside
4
Number of attempts to compile a side trace
instunroll
4
Max. unroll factor for instable loops
loopunroll
15
Max. unroll factor for loop ops in side traces
callunroll
3
Max. unroll factor for pseudo-recursive calls
recunroll
2
Min. unroll factor for true recursion
sizemcode
32
Size of each machine code area in KBytes (Windows: 64K)
maxmcode
512
Max. total size of all machine code areas in KBytes
----
Copyright E<copy> 2005-2017 Mike Pall E<middot> Contact
=cut
#Pod::HTML2Pod conversion notes:
#From file running.html
# 13720 bytes of input
#Mon May 14 13:19:16 2018 agentzh
# No a_name switch not specified, so will not try to render <a name='...'>
# No a_href switch not specified, so will not try to render <a href='...'>